ACE 4.8 HP Honda Gas Engine Cast Iron Pump with 1-1/2" Suction x 1-1/4" Discharge | GE-660-HONDA

48

ACE 4.8 HP Honda Gas Engine Cast Iron Pump with 1-1/2" Suction x 1-1/4" Discharge | GE-660-HONDA

Write a Review
SKU:
GE-660-HONDA

DOES NOT INCLUDE ELECTRIC START

For high flow and high quality check out the Ace GE-660-HONDA Gas Engine/Pump Combo.  With up to 110 gpm and the reliability of Honda you can feel secure you will get the job done efficiently. 

  • Suction 1-1/2" Female Pipe Thread
  • Discharge 1-1/4" Female Pipe Thread
  • Impeller attaches directly to 3/4" keyed shaft on 5.5 HP Honda
  • Stainless steel shaft sleeve with o-ring leak protection
  • All iron construction

Maximum Gallons Per Minute - 110 GPM

Maximum PSI - 120 PSI

Do Not Run Dry - Seal damage will result from running dry.  Impeller damage may also occur if run dry for an extended period.

Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure.  A continuous bypass is recommended for low flow applications

 

Part Breakdown

GE-660 Part Breakdown

 

Reference Number Part Number EDP Number Description Required
1 BAC-53 41110 Pipe plug, 1/8” NPT 3
1 41120 41120 Pipe plug, 1/8” NPT, stainless steel (optional) 3
2 ACAL-12 30161 Volute, 1 1/2” x 1 1/4”, clockwise rotation 1
2 ACAL-12-EC 30196 Volute, 1 1/2” x 1 1/4”, clockwise rotation, e-coated (optional) 1
3 ACAL-28-660-P 30556 Impeller, thermoplastic, 3/4” keyed shaft 1
3 ACAL-28-660 30171 Impeller, cast iron, 3/4” keyed shaft (optional) 1
3 ACAL-28-660-EC 30195 Impeller, cast iron, 3/4” keyed shaft, e-coated (optional) 1
4 41081 41081 Key, impeller, 3/16” x 3/16” x 3/4” 1
5 (1) BAC-7-660V 30225 Seal, Type 6A-3/4, carbon/ceramic/Viton 1
5 (2) BAC-7SC-660V 30226 Seal, Type 6A-3/4, silicon carbide/Viton 1
6(1)(2) BAC-4-150 40015 O-ring, volute seal 1
7 ACAL-66 30186 Bracket, GE-660 keyed shaft 1
7 ACAL-66-EC 30197 Bracket, GE-660 keyed shaft, e-coated (optional) 1
8 40950 40950 Cap screw, 3/8” NC x 3/4” hex head 8
8 40930 40930 Cap screw, 3/8”NC x 3/4”, stainless steel (optional) 1
9 GE-54-660 42222 Slinger 1
10 GE-60-SS 42235 Cap screw, 5/16” NF x 3/4”, stainless steel 5
10 42236 42236 Cap screw, 5/16” NF x 1”, stainless steel (Subaru engines) 1
11 (1)(2) 30031 30031 Washer, Stat-O-Seal, 5/16” ID, impeller attachment 1
12 (1)(2) 30028 30028 Washer, sealing, 5/16” ID, bracket attachment 4
# 42062 42062 Engine, 5.5 HP Honda, pull start, (GX160UT1QX2) 1
# 42064 42064 Engine, 5.5 HP Honda, electric start, (GX160K1QXE2) 1
# (1)(2) 30035 30035 Threadlocker, removable 1
# (1)(2) 30039 30039 Sealant, 3.3 gram foil pack -
(1) RK-GE-660 61162 Repair kit -
(2) RK-GESC-660 61167 Repair kit with silicon carbide shaft seal -

Technical Specifications

 

 

!